TYPE OF USE
Specifically designed for powerful and recent scooters and maxi-scooters fitted with 4 stroke engines, any engine displacement, with or without catalytic converters, without wet clutch. All scooters used for daily commuting and urban riding. Suitable for all type of gasoline fuels, leaded or unleaded, with or without Ethanol, biofuels.
STANDARDS API SN / SM / SL / SJ
SPECIFICATIONS JASO MB under N° M033MOT170
100% Synthetic engine oil, reduces engine internal friction, improves mechanical efficiency.
Improved oil resistance for excellent high temperature protection particularly indicated for city use: full load during long periods and stop & go use with difficult cooling.
Approved JASO MB lubricant ensures optimal scooter performance and fuel economy. Compared to a JASO MA lubricant, JASO MB lubricant provides real energy saving performance, up to 3% gains in fuel consumption compared to a 20W-50 JASO MA lubricant and up to 2% savings compared to a 10W-30 JASO MA oil, in urban/city conditions and start & stop driving mode.
By reducing fuel consumption, this JASO MB lubricant contributes to reducing greenhouse gases relative to CO2 emissions and allows reduction of polluting emissions (Low Emissions).
The SAE 10W-30 viscosity grade corresponds to the most recent manufacturers’ recommendations, especially HONDA for some of their models, and improves engine starts when cold and therefore reduces wear.
Very low volatility to reduce oil consumption.
Ensures engine cleanliness, detergent and dispersant properties, and resistance to viscosity increase from unburned deposits produced by the engine. High ageing resistance.
Anti-oxidation, Anti-corrosion, Anti-foam properties.
Drain interval: refer to manufacturers’ recommendations and tune to your own use. Can be mixed with synthetic or mineral oils.
Viscosity grade SAE J 300 10W-30
Density at 20°C (68°F) ASTM D1298 0.851
Viscosity at 40°C (104°F) ASTM D445 72.8 mm²/s
Viscosity at 100°C (212°F) ASTM D445 10.8 mm²/s
Viscosity Index ASTM D2270 141
Pour point ASTM D97 -34°C / -29°F
Flash point ASTM D92 228°C / 442°F
TBN ASTM D2896 7.1 mg KOH/g